Beywiki, the Beyblade Encyclopedia - Presented by the World Beyblade Organization - User contributions [en]

Shooters and Grips

2008-06-11T15:53:57Z

Composer of Requiems: /* Grips */

[[Shooters and Grips]], along with [[Winder | winders]] are used to launch all Beyblades.
__TOC__

=Plastic=
===Standard Shooters===
[[Image:Bey_008.jpg|thumb|EZShooter (right spin).]]
[[Image:Bey_010.jpg|thumb|EZShooter (right spin) with Beyblade attached.]]
*'''EZShooter (right spin):'''
This is the standard right spin shooter/launcher. The winder/rip cord is inserted in the back end, and to attach the Beyblade, you put both prongs of the launcher in the openings beside the Bit Chip.
[[Image:EZshooterLEFT.jpg|thumb|EZShooter (left spin)]]
*'''EZShooter (left spin):'''
Same as EZShooter right spin, except it has a different design and is for left spin. Two versions exist, the original that came with earlier Dragoons, and the "Neo Left" version. The original version had an additional layer of gears to change the direction of rotation, so that the winder could be inserted in the same orientation as the EZShooter right spin. The Neo Left connects the winder to the prongs more directly, so the winder was inserted upside-down, hence changing the direction of rotation.
*'''EZShooter (spring):'''
Has a spring between the prongs that presses against the Beyblade bitchip. It pushes down when launching, forcing Beyblade downwards. This reduces the risk of mislaunch.

===Grips===
[[Image:Customgrip.jpg|thumb|Customize Grip with Sniper Compass and Roller Support]]
The purpose of all grips is to increase players launching stability and accuracy. All experienced players should use a grip when playing.

*'''Customize Grip:'''
Both types of EZShooters can be placed into these. You can customize this grip with various other parts, such as metal grip, rubber grip, spring support, and the metal trigger. Hasbro released this grip as the “Dragoon Grip” and “Dranzer Grip”.

*'''Marksmen Grip:'''
Both types of EZShooters can be placed into these. The special feature of this grip is the sniper scope. When in the vertical position, this scope emits a red light that is supposed to be used to project where your Beyblade will land when launched.

*'''Catapult Grip:'''
The EZShooter is attached to a catapult mechanism equipped with a spring. Pulling the winder pulled back the EZShooter as well as setting the Beyblade spinning; when the winder has been released at the end of launch, the catapult mechanism springs forward to shoot the Beyblade forward.

*'''Spring Shooter:'''
Has a spring support just behind the slot for the winder. Theoretically this gave you a faster launch, but the more practical purpose helped to give a straighter pull and prevent unnecessary wear and tear on winder and gears.

*'''Dranzer/Driger/Dragoon Shooter:'''
EZShooters are not required to use these shooters. All three of these electronic shooters are designed to represent the bit beast they are named after. When turned on, you are able to play various mini-games related to Beyblade by using the winder and Bit Chips. Next to the RC shooter, this series is the second largest grip available.

*'''RC Shooter:'''
EZShooters are not required to use this shooter. This shooter was included with [[Remote Control Beyblades]]. When turned on, the trigger was pushed forward or backward to control the RC Beyblade. The RC shooter is the largest grip available in the game, in both plastic and HMS.

*'''Duotron Launcher:'''
With this, you are able to launcher two Beyblades at once, using one winder. This launcher is very inconsistent; launching one Beyblade at a time right after each other is more efficient.

===Grips Gallery===
<gallery>
Image: Bey_001.jpg|Customize Grip
Image: Bey_005.jpg|Marksmen Grip
Image: Bey_004.jpg|Marksmen Grip with light on.
Image: Springshooter.jpg|Spring Shooter
Image: Catapult.jpg|Catapult Grip
Image: Bey_002.jpg|Dranzer Shooter
Image: Bey_003.jpg|RC Shooter
Image: Bey_006.jpg|Duotron Launcher
</gallery>

=Heavy Metal System=
===Standard Shooters===
[[Image:Bey_013.jpg|thumb|Dual Shooter]]
[[Image:Bey_014.jpg|thumb|Dual Shooter with Beyblade attached.]]
[[Image:Doubleshooter.jpg|thumb|Double Shooter]]
[[Image:Stringshooter.jpg|thumb|String Shooter, shown open and closed]]
*'''Dual Shooter''':
Unlike the [[Plastic Beyblade | plastic generation]], the Dual Shooter, as suggested by the name has the ability of selecting spin direction by simply flipping the G Winder and placing it in it’s appropriate hole. This capability opened up many possibilities for the whole [[HMS]] series as there is no need to change any parts which you were once forced to do with plastic Beyblades. Attaching HMS Beyblades to the Dual Shooter is similar to the plastic generation, just line up the two clips with the end of the [[Bit Protector]] and two smaller ones will clamp onto the BP. It is common for Dual Shooters to not be very reliable, some even useless, so finding a working Dual Shooter is vital.

*'''Double Shooter:'''
This shooter has two sets of prongs to launch two Beyblades at once, and attachments for the prongs so that it can launch plastic as well as HMS. Unfortunately, it can only launch in right spin; also, it has very weak launch power.

*'''String Shooter:'''
Instead of a winder, this shooter had to be manually opened up so that a string could be wound around an axis. The advantage of this shooter is that it prevented the opponents from seeing what spin direction you would be using; however, launching with this shooter has a very different feel as compared to regular shooters. Also, it is very troublesome to wind.

===HMS Grips===
[[Image:Bey_012.jpg|thumb|HMS Customize Grip.]]
[[Image:HMSgrips.jpg|thumb|HMS Customize Grip, Double Shooter and Running Shooter. Note how the handles can be interchanged.]]
*'''HMS Customize Grip:'''
This grip is basically an updated version of the Customize Grip from the [[Plastic Beyblade | plastic generation]], except it can be used by both left handed and right handed players. To do this, you remove the compartment the Dual Shooter is placed into and slide the grip onto the other side. As with the Customize Grip, the HMS Customize Grip can be customized by adding the spring trigger or rubber grip.

*'''Running Shooter:'''
This shooter was included with [[Round Shell MS]] for use in its running mode. For more information on the Running Shooter, please see Round Shell MS’s article.

Shooters and Grips

2008-06-11T15:52:15Z

Composer of Requiems: /* HMS Grips */

[[Shooters and Grips]], along with [[Winder | winders]] are used to launch all Beyblades.
__TOC__

=Plastic=
===Standard Shooters===
[[Image:Bey_008.jpg|thumb|EZShooter (right spin).]]
[[Image:Bey_010.jpg|thumb|EZShooter (right spin) with Beyblade attached.]]
*'''EZShooter (right spin):'''
This is the standard right spin shooter/launcher. The winder/rip cord is inserted in the back end, and to attach the Beyblade, you put both prongs of the launcher in the openings beside the Bit Chip.
[[Image:EZshooterLEFT.jpg|thumb|EZShooter (left spin)]]
*'''EZShooter (left spin):'''
Same as EZShooter right spin, except it has a different design and is for left spin. Two versions exist, the original that came with earlier Dragoons, and the "Neo Left" version. The original version had an additional layer of gears to change the direction of rotation, so that the winder could be inserted in the same orientation as the EZShooter right spin. The Neo Left connects the winder to the prongs more directly, so the winder was inserted upside-down, hence changing the direction of rotation.
*'''EZShooter (spring):'''
Has a spring between the prongs that presses against the Beyblade bitchip. It pushes down when launching, forcing Beyblade downwards. This reduces the risk of mislaunch.

===Grips===
The purpose of all grips is to increase players launching stability and accuracy. All experienced players should use a grip when playing.

*'''Customize Grip:'''
Both types of EZShooters can be placed into these. You can customize this grip with various other parts, such as metal grip, rubber grip, spring support, and the metal trigger. Hasbro released this grip as the “Dragoon Grip” and “Dranzer Grip”.

*'''Marksmen Grip:'''
Both types of EZShooters can be placed into these. The special feature of this grip is the sniper scope. When in the vertical position, this scope emits a red light that is supposed to be used to project where your Beyblade will land when launched.

*'''Catapult Grip:'''
The EZShooter is attached to a catapult mechanism equipped with a spring. Pulling the winder pulled back the EZShooter as well as setting the Beyblade spinning; when the winder has been released at the end of launch, the catapult mechanism springs forward to shoot the Beyblade forward.

*'''Spring Shooter:'''
Has a spring support just behind the slot for the winder. Theoretically this gave you a faster launch, but the more practical purpose helped to give a straighter pull and prevent unnecessary wear and tear on winder and gears.

*'''Dranzer/Driger/Dragoon Shooter:'''
EZShooters are not required to use these shooters. All three of these electronic shooters are designed to represent the bit beast they are named after. When turned on, you are able to play various mini-games related to Beyblade by using the winder and Bit Chips. Next to the RC shooter, this series is the second largest grip available.

*'''RC Shooter:'''
EZShooters are not required to use this shooter. This shooter was included with [[Remote Control Beyblades]]. When turned on, the trigger was pushed forward or backward to control the RC Beyblade. The RC shooter is the largest grip available in the game, in both plastic and HMS.

*'''Duotron Launcher:'''
With this, you are able to launcher two Beyblades at once, using one winder. This launcher is very inconsistent; launching one Beyblade at a time right after each other is more efficient.
===Grips Gallery===
<gallery>
Image: Bey_001.jpg|Customize Grip
Image: Bey_005.jpg|Marksmen Grip
Image: Bey_004.jpg|Marksmen Grip with light on.
Image: Springshooter.jpg|Spring Shooter
Image: Catapult.jpg|Catapult Grip
Image: Bey_002.jpg|Dranzer Shooter
Image: Bey_003.jpg|RC Shooter
Image: Bey_006.jpg|Duotron Launcher
</gallery>

=Heavy Metal System=
===Standard Shooters===
[[Image:Bey_013.jpg|thumb|Dual Shooter]]
[[Image:Bey_014.jpg|thumb|Dual Shooter with Beyblade attached.]]
[[Image:Doubleshooter.jpg|thumb|Double Shooter]]
[[Image:Stringshooter.jpg|thumb|String Shooter, shown open and closed]]
*'''Dual Shooter''':
Unlike the [[Plastic Beyblade | plastic generation]], the Dual Shooter, as suggested by the name has the ability of selecting spin direction by simply flipping the G Winder and placing it in it’s appropriate hole. This capability opened up many possibilities for the whole [[HMS]] series as there is no need to change any parts which you were once forced to do with plastic Beyblades. Attaching HMS Beyblades to the Dual Shooter is similar to the plastic generation, just line up the two clips with the end of the [[Bit Protector]] and two smaller ones will clamp onto the BP. It is common for Dual Shooters to not be very reliable, some even useless, so finding a working Dual Shooter is vital.

*'''Double Shooter:'''
This shooter has two sets of prongs to launch two Beyblades at once, and attachments for the prongs so that it can launch plastic as well as HMS. Unfortunately, it can only launch in right spin; also, it has very weak launch power.

*'''String Shooter:'''
Instead of a winder, this shooter had to be manually opened up so that a string could be wound around an axis. The advantage of this shooter is that it prevented the opponents from seeing what spin direction you would be using; however, launching with this shooter has a very different feel as compared to regular shooters. Also, it is very troublesome to wind.

===HMS Grips===
[[Image:Bey_012.jpg|thumb|HMS Customize Grip.]]
[[Image:HMSgrips.jpg|thumb|HMS Customize Grip, Double Shooter and Running Shooter. Note how the handles can be interchanged.]]
*'''HMS Customize Grip:'''
This grip is basically an updated version of the Customize Grip from the [[Plastic Beyblade | plastic generation]], except it can be used by both left handed and right handed players. To do this, you remove the compartment the Dual Shooter is placed into and slide the grip onto the other side. As with the Customize Grip, the HMS Customize Grip can be customized by adding the spring trigger or rubber grip.

*'''Running Shooter:'''
This shooter was included with [[Round Shell MS]] for use in its running mode. For more information on the Running Shooter, please see Round Shell MS’s article.

Shooters and Grips

2008-06-11T15:50:17Z

Composer of Requiems: /* Standard Shooters */

[[Shooters and Grips]], along with [[Winder | winders]] are used to launch all Beyblades.
__TOC__

=Plastic=
===Standard Shooters===
[[Image:Bey_008.jpg|thumb|EZShooter (right spin).]]
[[Image:Bey_010.jpg|thumb|EZShooter (right spin) with Beyblade attached.]]
*'''EZShooter (right spin):'''
This is the standard right spin shooter/launcher. The winder/rip cord is inserted in the back end, and to attach the Beyblade, you put both prongs of the launcher in the openings beside the Bit Chip.
[[Image:EZshooterLEFT.jpg|thumb|EZShooter (left spin)]]
*'''EZShooter (left spin):'''
Same as EZShooter right spin, except it has a different design and is for left spin. Two versions exist, the original that came with earlier Dragoons, and the "Neo Left" version. The original version had an additional layer of gears to change the direction of rotation, so that the winder could be inserted in the same orientation as the EZShooter right spin. The Neo Left connects the winder to the prongs more directly, so the winder was inserted upside-down, hence changing the direction of rotation.
*'''EZShooter (spring):'''
Has a spring between the prongs that presses against the Beyblade bitchip. It pushes down when launching, forcing Beyblade downwards. This reduces the risk of mislaunch.

===Grips===
The purpose of all grips is to increase players launching stability and accuracy. All experienced players should use a grip when playing.

*'''Customize Grip:'''
Both types of EZShooters can be placed into these. You can customize this grip with various other parts, such as metal grip, rubber grip, spring support, and the metal trigger. Hasbro released this grip as the “Dragoon Grip” and “Dranzer Grip”.

*'''Marksmen Grip:'''
Both types of EZShooters can be placed into these. The special feature of this grip is the sniper scope. When in the vertical position, this scope emits a red light that is supposed to be used to project where your Beyblade will land when launched.

*'''Catapult Grip:'''
The EZShooter is attached to a catapult mechanism equipped with a spring. Pulling the winder pulled back the EZShooter as well as setting the Beyblade spinning; when the winder has been released at the end of launch, the catapult mechanism springs forward to shoot the Beyblade forward.

*'''Spring Shooter:'''
Has a spring support just behind the slot for the winder. Theoretically this gave you a faster launch, but the more practical purpose helped to give a straighter pull and prevent unnecessary wear and tear on winder and gears.

*'''Dranzer/Driger/Dragoon Shooter:'''
EZShooters are not required to use these shooters. All three of these electronic shooters are designed to represent the bit beast they are named after. When turned on, you are able to play various mini-games related to Beyblade by using the winder and Bit Chips. Next to the RC shooter, this series is the second largest grip available.

*'''RC Shooter:'''
EZShooters are not required to use this shooter. This shooter was included with [[Remote Control Beyblades]]. When turned on, the trigger was pushed forward or backward to control the RC Beyblade. The RC shooter is the largest grip available in the game, in both plastic and HMS.

*'''Duotron Launcher:'''
With this, you are able to launcher two Beyblades at once, using one winder. This launcher is very inconsistent; launching one Beyblade at a time right after each other is more efficient.
===Grips Gallery===
<gallery>
Image: Bey_001.jpg|Customize Grip
Image: Bey_005.jpg|Marksmen Grip
Image: Bey_004.jpg|Marksmen Grip with light on.
Image: Springshooter.jpg|Spring Shooter
Image: Catapult.jpg|Catapult Grip
Image: Bey_002.jpg|Dranzer Shooter
Image: Bey_003.jpg|RC Shooter
Image: Bey_006.jpg|Duotron Launcher
</gallery>

=Heavy Metal System=
===Standard Shooters===
[[Image:Bey_013.jpg|thumb|Dual Shooter]]
[[Image:Bey_014.jpg|thumb|Dual Shooter with Beyblade attached.]]
[[Image:Doubleshooter.jpg|thumb|Double Shooter]]
[[Image:Stringshooter.jpg|thumb|String Shooter, shown open and closed]]
*'''Dual Shooter''':
Unlike the [[Plastic Beyblade | plastic generation]], the Dual Shooter, as suggested by the name has the ability of selecting spin direction by simply flipping the G Winder and placing it in it’s appropriate hole. This capability opened up many possibilities for the whole [[HMS]] series as there is no need to change any parts which you were once forced to do with plastic Beyblades. Attaching HMS Beyblades to the Dual Shooter is similar to the plastic generation, just line up the two clips with the end of the [[Bit Protector]] and two smaller ones will clamp onto the BP. It is common for Dual Shooters to not be very reliable, some even useless, so finding a working Dual Shooter is vital.

*'''Double Shooter:'''
This shooter has two sets of prongs to launch two Beyblades at once, and attachments for the prongs so that it can launch plastic as well as HMS. Unfortunately, it can only launch in right spin; also, it has very weak launch power.

*'''String Shooter:'''
Instead of a winder, this shooter had to be manually opened up so that a string could be wound around an axis. The advantage of this shooter is that it prevented the opponents from seeing what spin direction you would be using; however, launching with this shooter has a very different feel as compared to regular shooters. Also, it is very troublesome to wind.

===HMS Grips===
[[Image:Bey_012.jpg|thumb|HMS Customize Grip.]]
*'''HMS Customize Grip:'''
This grip is basically an updated version of the Customize Grip from the [[Plastic Beyblade | plastic generation]], except it can be used by both left handed and right handed players. To do this, you remove the compartment the Dual Shooter is placed into and slide the grip onto the other side. As with the Customize Grip, the HMS Customize Grip can be customized by adding the spring trigger or rubber grip.

*'''Running Shooter:'''
This shooter was included with [[Round Shell MS]] for use in its running mode. For more information on the Running Shooter, please see Round Shell MS’s article.

Shooters and Grips

2008-06-11T15:48:28Z

Composer of Requiems: /* Standard Shooters */

[[Shooters and Grips]], along with [[Winder | winders]] are used to launch all Beyblades.
__TOC__

=Plastic=
===Standard Shooters===
[[Image:Bey_008.jpg|thumb|EZShooter (right spin).]]
[[Image:Bey_010.jpg|thumb|EZShooter (right spin) with Beyblade attached.]]
*'''EZShooter (right spin):'''
This is the standard right spin shooter/launcher. The winder/rip cord is inserted in the back end, and to attach the Beyblade, you put both prongs of the launcher in the openings beside the Bit Chip.
[[Image:EZshooterLEFT.jpg|thumb|EZShooter (left spin)]]
*'''EZShooter (left spin):'''
Same as EZShooter right spin, except it has a different design and is for left spin. Two versions exist, the original that came with earlier Dragoons, and the "Neo Left" version. The original version had an additional layer of gears to change the direction of rotation, so that the winder could be inserted in the same orientation as the EZShooter right spin. The Neo Left connects the winder to the prongs more directly, so the winder was inserted upside-down, hence changing the direction of rotation.
*'''EZShooter (spring):'''
Has a spring between the prongs that presses against the Beyblade bitchip. It pushes down when launching, forcing Beyblade downwards. This reduces the risk of mislaunch.

===Grips===
The purpose of all grips is to increase players launching stability and accuracy. All experienced players should use a grip when playing.

*'''Customize Grip:'''
Both types of EZShooters can be placed into these. You can customize this grip with various other parts, such as metal grip, rubber grip, spring support, and the metal trigger. Hasbro released this grip as the “Dragoon Grip” and “Dranzer Grip”.

*'''Marksmen Grip:'''
Both types of EZShooters can be placed into these. The special feature of this grip is the sniper scope. When in the vertical position, this scope emits a red light that is supposed to be used to project where your Beyblade will land when launched.

*'''Catapult Grip:'''
The EZShooter is attached to a catapult mechanism equipped with a spring. Pulling the winder pulled back the EZShooter as well as setting the Beyblade spinning; when the winder has been released at the end of launch, the catapult mechanism springs forward to shoot the Beyblade forward.

*'''Spring Shooter:'''
Has a spring support just behind the slot for the winder. Theoretically this gave you a faster launch, but the more practical purpose helped to give a straighter pull and prevent unnecessary wear and tear on winder and gears.

*'''Dranzer/Driger/Dragoon Shooter:'''
EZShooters are not required to use these shooters. All three of these electronic shooters are designed to represent the bit beast they are named after. When turned on, you are able to play various mini-games related to Beyblade by using the winder and Bit Chips. Next to the RC shooter, this series is the second largest grip available.

*'''RC Shooter:'''
EZShooters are not required to use this shooter. This shooter was included with [[Remote Control Beyblades]]. When turned on, the trigger was pushed forward or backward to control the RC Beyblade. The RC shooter is the largest grip available in the game, in both plastic and HMS.

*'''Duotron Launcher:'''
With this, you are able to launcher two Beyblades at once, using one winder. This launcher is very inconsistent; launching one Beyblade at a time right after each other is more efficient.
===Grips Gallery===
<gallery>
Image: Bey_001.jpg|Customize Grip
Image: Bey_005.jpg|Marksmen Grip
Image: Bey_004.jpg|Marksmen Grip with light on.
Image: Springshooter.jpg|Spring Shooter
Image: Catapult.jpg|Catapult Grip
Image: Bey_002.jpg|Dranzer Shooter
Image: Bey_003.jpg|RC Shooter
Image: Bey_006.jpg|Duotron Launcher
</gallery>

=Heavy Metal System=
===Standard Shooters===
[[Image:Bey_013.jpg|thumb|Dual Shooter]]
[[Image:Bey_014.jpg|thumb|Dual Shooter with Beyblade attached.]]
*'''Dual Shooter''':
Unlike the [[Plastic Beyblade | plastic generation]], the Dual Shooter, as suggested by the name has the ability of selecting spin direction by simply flipping the G Winder and placing it in it’s appropriate hole. This capability opened up many possibilities for the whole [[HMS]] series as there is no need to change any parts which you were once forced to do with plastic Beyblades. Attaching HMS Beyblades to the Dual Shooter is similar to the plastic generation, just line up the two clips with the end of the [[Bit Protector]] and two smaller ones will clamp onto the BP. It is common for Dual Shooters to not be very reliable, some even useless, so finding a working Dual Shooter is vital.

*'''Double Shooter:'''
This shooter has two sets of prongs to launch two Beyblades at once, and attachments for the prongs so that it can launch plastic as well as HMS. Unfortunately, it can only launch in right spin; also, it has very weak launch power.

*'''String Shooter:'''
Instead of a winder, this shooter had to be manually opened up so that a string could be wound around an axis. The advantage of this shooter is that it prevented the opponents from seeing what spin direction you would be using; however, launching with this shooter has a very different feel as compared to regular shooters. Also, it is very troublesome to wind.

===HMS Grips===
[[Image:Bey_012.jpg|thumb|HMS Customize Grip.]]
*'''HMS Customize Grip:'''
This grip is basically an updated version of the Customize Grip from the [[Plastic Beyblade | plastic generation]], except it can be used by both left handed and right handed players. To do this, you remove the compartment the Dual Shooter is placed into and slide the grip onto the other side. As with the Customize Grip, the HMS Customize Grip can be customized by adding the spring trigger or rubber grip.

*'''Running Shooter:'''
This shooter was included with [[Round Shell MS]] for use in its running mode. For more information on the Running Shooter, please see Round Shell MS’s article.

Shooters and Grips

2008-06-11T15:47:07Z

Composer of Requiems: /* Grips Gallery */

[[Shooters and Grips]], along with [[Winder | winders]] are used to launch all Beyblades.
__TOC__

=Plastic=
===Standard Shooters===
[[Image:Bey_008.jpg|thumb|EZShooter (right spin).]]
[[Image:Bey_010.jpg|thumb|EZShooter (right spin) with Beyblade attached.]]
*'''EZShooter (right spin):'''
This is the standard right spin shooter/launcher. The winder/rip cord is inserted in the back end, and to attach the Beyblade, you put both prongs of the launcher in the openings beside the Bit Chip.
[[Image:Bey_011.jpg|thumb|EZShooter (left spin)]]
*'''EZShooter (left spin):'''
Same as EZShooter right spin, except it has a different design and is for left spin. Two versions exist, the original that came with earlier Dragoons, and the "Neo Left" version. The original version had an additional layer of gears to change the direction of rotation, so that the winder could be inserted in the same orientation as the EZShooter right spin. The Neo Left connects the winder to the prongs more directly, so the winder was inserted upside-down, hence changing the direction of rotation.
*'''EZShooter (spring):'''
Has a spring between the prongs that presses against the Beyblade bitchip. It pushes down when launching, forcing Beyblade downwards. This reduces the risk of mislaunch.

===Grips===
The purpose of all grips is to increase players launching stability and accuracy. All experienced players should use a grip when playing.

*'''Customize Grip:'''
Both types of EZShooters can be placed into these. You can customize this grip with various other parts, such as metal grip, rubber grip, spring support, and the metal trigger. Hasbro released this grip as the “Dragoon Grip” and “Dranzer Grip”.

*'''Marksmen Grip:'''
Both types of EZShooters can be placed into these. The special feature of this grip is the sniper scope. When in the vertical position, this scope emits a red light that is supposed to be used to project where your Beyblade will land when launched.

*'''Catapult Grip:'''
The EZShooter is attached to a catapult mechanism equipped with a spring. Pulling the winder pulled back the EZShooter as well as setting the Beyblade spinning; when the winder has been released at the end of launch, the catapult mechanism springs forward to shoot the Beyblade forward.

*'''Spring Shooter:'''
Has a spring support just behind the slot for the winder. Theoretically this gave you a faster launch, but the more practical purpose helped to give a straighter pull and prevent unnecessary wear and tear on winder and gears.

*'''Dranzer/Driger/Dragoon Shooter:'''
EZShooters are not required to use these shooters. All three of these electronic shooters are designed to represent the bit beast they are named after. When turned on, you are able to play various mini-games related to Beyblade by using the winder and Bit Chips. Next to the RC shooter, this series is the second largest grip available.

*'''RC Shooter:'''
EZShooters are not required to use this shooter. This shooter was included with [[Remote Control Beyblades]]. When turned on, the trigger was pushed forward or backward to control the RC Beyblade. The RC shooter is the largest grip available in the game, in both plastic and HMS.

*'''Duotron Launcher:'''
With this, you are able to launcher two Beyblades at once, using one winder. This launcher is very inconsistent; launching one Beyblade at a time right after each other is more efficient.
===Grips Gallery===
<gallery>
Image: Bey_001.jpg|Customize Grip
Image: Bey_005.jpg|Marksmen Grip
Image: Bey_004.jpg|Marksmen Grip with light on.
Image: Springshooter.jpg|Spring Shooter
Image: Catapult.jpg|Catapult Grip
Image: Bey_002.jpg|Dranzer Shooter
Image: Bey_003.jpg|RC Shooter
Image: Bey_006.jpg|Duotron Launcher
</gallery>

=Heavy Metal System=
===Standard Shooters===
[[Image:Bey_013.jpg|thumb|Dual Shooter]]
[[Image:Bey_014.jpg|thumb|Dual Shooter with Beyblade attached.]]
*'''Dual Shooter''':
Unlike the [[Plastic Beyblade | plastic generation]], the Dual Shooter, as suggested by the name has the ability of selecting spin direction by simply flipping the G Winder and placing it in it’s appropriate hole. This capability opened up many possibilities for the whole [[HMS]] series as there is no need to change any parts which you were once forced to do with plastic Beyblades. Attaching HMS Beyblades to the Dual Shooter is similar to the plastic generation, just line up the two clips with the end of the [[Bit Protector]] and two smaller ones will clamp onto the BP. It is common for Dual Shooters to not be very reliable, some even useless, so finding a working Dual Shooter is vital.

*'''Double Shooter:'''
This shooter has two sets of prongs to launch two Beyblades at once, and attachments for the prongs so that it can launch plastic as well as HMS. Unfortunately, it can only launch in right spin; also, it has very weak launch power.

*'''String Shooter:'''
Instead of a winder, this shooter had to be manually opened up so that a string could be wound around an axis. The advantage of this shooter is that it prevented the opponents from seeing what spin direction you would be using; however, launching with this shooter has a very different feel as compared to regular shooters. Also, it is very troublesome to wind.

===HMS Grips===
[[Image:Bey_012.jpg|thumb|HMS Customize Grip.]]
*'''HMS Customize Grip:'''
This grip is basically an updated version of the Customize Grip from the [[Plastic Beyblade | plastic generation]], except it can be used by both left handed and right handed players. To do this, you remove the compartment the Dual Shooter is placed into and slide the grip onto the other side. As with the Customize Grip, the HMS Customize Grip can be customized by adding the spring trigger or rubber grip.

*'''Running Shooter:'''
This shooter was included with [[Round Shell MS]] for use in its running mode. For more information on the Running Shooter, please see Round Shell MS’s article.

File:Stringshooter.jpg

2008-06-11T15:43:04Z

Composer of Requiems: Two HMS String Shooters. Leftmost shooter is completely wound and closed, while shooter on the right is unwound and open, with the string in the foreground.

Two HMS String Shooters. Leftmost shooter is completely wound and closed, while shooter on the right is unwound and open, with the string in the foreground.

File:Springshooter.jpg

2008-06-11T15:41:31Z

Composer of Requiems: Spring Shooter. The spring support is compressed in this photo.

Spring Shooter. The spring support is compressed in this photo.

File:Roundshell grip.jpg

2008-06-11T15:41:20Z

Composer of Requiems: Round Shell MS running shooter and grip. Recoloured black by user.

Round Shell MS running shooter and grip. Recoloured black by user.

File:HMSgrips.jpg

2008-06-11T15:39:39Z

Composer of Requiems: Usage of handles on HMS grips. Note how interchangeable they are.

Usage of handles on HMS grips. Note how interchangeable they are.

File:Customgrip.jpg

2008-06-11T15:38:21Z

Composer of Requiems: Plastic Customize Grip, with Sniper Compass and roller parts.

Plastic Customize Grip, with Sniper Compass and roller parts.

File:Doubleshooter.jpg

2008-06-11T15:36:44Z

Composer of Requiems: HMS Double Shooter

HMS Double Shooter

File:EZshooterLEFT.jpg

2008-06-11T15:33:48Z

Composer of Requiems: EZShooter Left, both original version (background, orange) and NEO version (foreground, blue). Note how the teeth on the winders are pointing in different directions. Refer to article on Shooters and Grips for more information.

EZShooter Left, both original version (background, orange) and NEO version (foreground, blue). Note how the teeth on the winders are pointing in different directions. Refer to article on Shooters and Grips for more information.

File:Catapult.jpg

2008-06-11T15:29:07Z

Composer of Requiems: Catapult grip, with launching mechanism shown. Equipped with EZShooter right and gold edition Galeon.

Catapult grip, with launching mechanism shown. Equipped with EZShooter right and gold edition Galeon.

Shooters and Grips

2008-06-11T15:15:25Z

Composer of Requiems: /* Heavy Metal System */

[[Shooters and Grips]], along with [[Winder | winders]] are used to launch all Beyblades.
__TOC__

=Plastic=
===Standard Shooters===
[[Image:Bey_008.jpg|thumb|EZShooter (right spin).]]
[[Image:Bey_010.jpg|thumb|EZShooter (right spin) with Beyblade attached.]]
*'''EZShooter (right spin):'''
This is the standard right spin shooter/launcher. The winder/rip cord is inserted in the back end, and to attach the Beyblade, you put both prongs of the launcher in the openings beside the Bit Chip.
[[Image:Bey_011.jpg|thumb|EZShooter (left spin)]]
*'''EZShooter (left spin):'''
Same as EZShooter right spin, except it has a different design and is for left spin. Two versions exist, the original that came with earlier Dragoons, and the "Neo Left" version. The original version had an additional layer of gears to change the direction of rotation, so that the winder could be inserted in the same orientation as the EZShooter right spin. The Neo Left connects the winder to the prongs more directly, so the winder was inserted upside-down, hence changing the direction of rotation.
*'''EZShooter (spring):'''
Has a spring between the prongs that presses against the Beyblade bitchip. It pushes down when launching, forcing Beyblade downwards. This reduces the risk of mislaunch.

===Grips===
The purpose of all grips is to increase players launching stability and accuracy. All experienced players should use a grip when playing.

*'''Customize Grip:'''
Both types of EZShooters can be placed into these. You can customize this grip with various other parts, such as metal grip, rubber grip, spring support, and the metal trigger. Hasbro released this grip as the “Dragoon Grip” and “Dranzer Grip”.

*'''Marksmen Grip:'''
Both types of EZShooters can be placed into these. The special feature of this grip is the sniper scope. When in the vertical position, this scope emits a red light that is supposed to be used to project where your Beyblade will land when launched.

*'''Catapult Grip:'''
The EZShooter is attached to a catapult mechanism equipped with a spring. Pulling the winder pulled back the EZShooter as well as setting the Beyblade spinning; when the winder has been released at the end of launch, the catapult mechanism springs forward to shoot the Beyblade forward.

*'''Spring Shooter:'''
Has a spring support just behind the slot for the winder. Theoretically this gave you a faster launch, but the more practical purpose helped to give a straighter pull and prevent unnecessary wear and tear on winder and gears.

*'''Dranzer/Driger/Dragoon Shooter:'''
EZShooters are not required to use these shooters. All three of these electronic shooters are designed to represent the bit beast they are named after. When turned on, you are able to play various mini-games related to Beyblade by using the winder and Bit Chips. Next to the RC shooter, this series is the second largest grip available.

*'''RC Shooter:'''
EZShooters are not required to use this shooter. This shooter was included with [[Remote Control Beyblades]]. When turned on, the trigger was pushed forward or backward to control the RC Beyblade. The RC shooter is the largest grip available in the game, in both plastic and HMS.

*'''Duotron Launcher:'''
With this, you are able to launcher two Beyblades at once, using one winder. This launcher is very inconsistent; launching one Beyblade at a time right after each other is more efficient.
===Grips Gallery===
<gallery>
Image: Bey_001.jpg|Customize Grip
Image: Bey_005.jpg|Marksmen Grip
Image: Bey_004.jpg|Marksmen Grip with light on.
Image: Bey_002.jpg|Dranzer Shooter
Image: Bey_003.jpg|RC Shooter
Image: Bey_006.jpg|Duotron Launcher
</gallery>

=Heavy Metal System=
===Standard Shooters===
[[Image:Bey_013.jpg|thumb|Dual Shooter]]
[[Image:Bey_014.jpg|thumb|Dual Shooter with Beyblade attached.]]
*'''Dual Shooter''':
Unlike the [[Plastic Beyblade | plastic generation]], the Dual Shooter, as suggested by the name has the ability of selecting spin direction by simply flipping the G Winder and placing it in it’s appropriate hole. This capability opened up many possibilities for the whole [[HMS]] series as there is no need to change any parts which you were once forced to do with plastic Beyblades. Attaching HMS Beyblades to the Dual Shooter is similar to the plastic generation, just line up the two clips with the end of the [[Bit Protector]] and two smaller ones will clamp onto the BP. It is common for Dual Shooters to not be very reliable, some even useless, so finding a working Dual Shooter is vital.

*'''Double Shooter:'''
This shooter has two sets of prongs to launch two Beyblades at once, and attachments for the prongs so that it can launch plastic as well as HMS. Unfortunately, it can only launch in right spin; also, it has very weak launch power.

*'''String Shooter:'''
Instead of a winder, this shooter had to be manually opened up so that a string could be wound around an axis. The advantage of this shooter is that it prevented the opponents from seeing what spin direction you would be using; however, launching with this shooter has a very different feel as compared to regular shooters. Also, it is very troublesome to wind.

===HMS Grips===
[[Image:Bey_012.jpg|thumb|HMS Customize Grip.]]
*'''HMS Customize Grip:'''
This grip is basically an updated version of the Customize Grip from the [[Plastic Beyblade | plastic generation]], except it can be used by both left handed and right handed players. To do this, you remove the compartment the Dual Shooter is placed into and slide the grip onto the other side. As with the Customize Grip, the HMS Customize Grip can be customized by adding the spring trigger or rubber grip.

*'''Running Shooter:'''
This shooter was included with [[Round Shell MS]] for use in its running mode. For more information on the Running Shooter, please see Round Shell MS’s article.

Shooters and Grips

2008-06-11T14:47:45Z

Composer of Requiems: /* Heavy Metal System */

[[Shooters and Grips]], along with [[Winder | winders]] are used to launch all Beyblades.
__TOC__

=Plastic=
===Standard Shooters===
[[Image:Bey_008.jpg|thumb|EZShooter (right spin).]]
[[Image:Bey_010.jpg|thumb|EZShooter (right spin) with Beyblade attached.]]
*'''EZShooter (right spin):'''
This is the standard right spin shooter/launcher. The winder/rip cord is inserted in the back end, and to attach the Beyblade, you put both prongs of the launcher in the openings beside the Bit Chip.
[[Image:Bey_011.jpg|thumb|EZShooter (left spin)]]
*'''EZShooter (left spin):'''
Same as EZShooter right spin, except it has a different design and is for left spin. Two versions exist, the original that came with earlier Dragoons, and the "Neo Left" version. The original version had an additional layer of gears to change the direction of rotation, so that the winder could be inserted in the same orientation as the EZShooter right spin. The Neo Left connects the winder to the prongs more directly, so the winder was inserted upside-down, hence changing the direction of rotation.
*'''EZShooter (spring):'''
Has a spring between the prongs that presses against the Beyblade bitchip. It pushes down when launching, forcing Beyblade downwards. This reduces the risk of mislaunch.

===Grips===
The purpose of all grips is to increase players launching stability and accuracy. All experienced players should use a grip when playing.

*'''Customize Grip:'''
Both types of EZShooters can be placed into these. You can customize this grip with various other parts, such as metal grip, rubber grip, spring support, and the metal trigger. Hasbro released this grip as the “Dragoon Grip” and “Dranzer Grip”.

*'''Marksmen Grip:'''
Both types of EZShooters can be placed into these. The special feature of this grip is the sniper scope. When in the vertical position, this scope emits a red light that is supposed to be used to project where your Beyblade will land when launched.

*'''Catapult Grip:'''
The EZShooter is attached to a catapult mechanism equipped with a spring. Pulling the winder pulled back the EZShooter as well as setting the Beyblade spinning; when the winder has been released at the end of launch, the catapult mechanism springs forward to shoot the Beyblade forward.

*'''Spring Shooter:'''
Has a spring support just behind the slot for the winder. Theoretically this gave you a faster launch, but the more practical purpose helped to give a straighter pull and prevent unnecessary wear and tear on winder and gears.

*'''Dranzer/Driger/Dragoon Shooter:'''
EZShooters are not required to use these shooters. All three of these electronic shooters are designed to represent the bit beast they are named after. When turned on, you are able to play various mini-games related to Beyblade by using the winder and Bit Chips. Next to the RC shooter, this series is the second largest grip available.

*'''RC Shooter:'''
EZShooters are not required to use this shooter. This shooter was included with [[Remote Control Beyblades]]. When turned on, the trigger was pushed forward or backward to control the RC Beyblade. The RC shooter is the largest grip available in the game, in both plastic and HMS.

*'''Duotron Launcher:'''
With this, you are able to launcher two Beyblades at once, using one winder. This launcher is very inconsistent; launching one Beyblade at a time right after each other is more efficient.
===Grips Gallery===
<gallery>
Image: Bey_001.jpg|Customize Grip
Image: Bey_005.jpg|Marksmen Grip
Image: Bey_004.jpg|Marksmen Grip with light on.
Image: Bey_002.jpg|Dranzer Shooter
Image: Bey_003.jpg|RC Shooter
Image: Bey_006.jpg|Duotron Launcher
</gallery>

=Heavy Metal System=
===Standard Shooters===
[[Image:Bey_013.jpg|thumb|Dual Shooter]]
[[Image:Bey_014.jpg|thumb|Dual Shooter with Beyblade attached.]]
*'''Dual Shooter''':
Unlike the [[Plastic Beyblade | plastic generation]], the Dual Shooter, as suggested by the name has the ability of selecting spin direction by simply flipping the G Winder and placing it in it’s appropriate hole. This capability opened up many possibilities for the whole [[HMS]] series as there is no need to change any parts which you were once forced to do with plastic Beyblades. Attaching HMS Beyblades to the Dual Shooter is similar to the plastic generation, just line up the two clips with the end of the [[Bit Protector]] and two smaller ones will clamp onto the BP. It is common for Dual Shooters to not be very reliable, some even useless, so finding a working Dual Shooter is vital.

*'''Double Shooter:'''
This shooter has two sets of prongs to launch two Beyblades at once, and attachments for the prongs so that it can launch plastic as well as HMS. Unfortunately, it can only launch in right spin; also, it has very weak launch power.

===HMS Grips===
[[Image:Bey_012.jpg|thumb|HMS Customize Grip.]]
*'''HMS Customize Grip:'''
This grip is basically an updated version of the Customize Grip from the [[Plastic Beyblade | plastic generation]], except it can be used by both left handed and right handed players. To do this, you remove the compartment the Dual Shooter is placed into and slide the grip onto the other side. As with the Customize Grip, the HMS Customize Grip can be customized by adding the spring trigger or rubber grip.

*'''Running Shooter:'''
This shooter was included with [[Round Shell MS]] for use in its running mode. For more information on the Running Shooter, please see Round Shell MS’s article.

Shooters and Grips

2008-06-11T14:44:36Z

Composer of Requiems: /* Plastic */

[[Shooters and Grips]], along with [[Winder | winders]] are used to launch all Beyblades.
__TOC__

=Plastic=
===Standard Shooters===
[[Image:Bey_008.jpg|thumb|EZShooter (right spin).]]
[[Image:Bey_010.jpg|thumb|EZShooter (right spin) with Beyblade attached.]]
*'''EZShooter (right spin):'''
This is the standard right spin shooter/launcher. The winder/rip cord is inserted in the back end, and to attach the Beyblade, you put both prongs of the launcher in the openings beside the Bit Chip.
[[Image:Bey_011.jpg|thumb|EZShooter (left spin)]]
*'''EZShooter (left spin):'''
Same as EZShooter right spin, except it has a different design and is for left spin. Two versions exist, the original that came with earlier Dragoons, and the "Neo Left" version. The original version had an additional layer of gears to change the direction of rotation, so that the winder could be inserted in the same orientation as the EZShooter right spin. The Neo Left connects the winder to the prongs more directly, so the winder was inserted upside-down, hence changing the direction of rotation.
*'''EZShooter (spring):'''
Has a spring between the prongs that presses against the Beyblade bitchip. It pushes down when launching, forcing Beyblade downwards. This reduces the risk of mislaunch.

===Grips===
The purpose of all grips is to increase players launching stability and accuracy. All experienced players should use a grip when playing.

*'''Customize Grip:'''
Both types of EZShooters can be placed into these. You can customize this grip with various other parts, such as metal grip, rubber grip, spring support, and the metal trigger. Hasbro released this grip as the “Dragoon Grip” and “Dranzer Grip”.

*'''Marksmen Grip:'''
Both types of EZShooters can be placed into these. The special feature of this grip is the sniper scope. When in the vertical position, this scope emits a red light that is supposed to be used to project where your Beyblade will land when launched.

*'''Catapult Grip:'''
The EZShooter is attached to a catapult mechanism equipped with a spring. Pulling the winder pulled back the EZShooter as well as setting the Beyblade spinning; when the winder has been released at the end of launch, the catapult mechanism springs forward to shoot the Beyblade forward.

*'''Spring Shooter:'''
Has a spring support just behind the slot for the winder. Theoretically this gave you a faster launch, but the more practical purpose helped to give a straighter pull and prevent unnecessary wear and tear on winder and gears.

*'''Dranzer/Driger/Dragoon Shooter:'''
EZShooters are not required to use these shooters. All three of these electronic shooters are designed to represent the bit beast they are named after. When turned on, you are able to play various mini-games related to Beyblade by using the winder and Bit Chips. Next to the RC shooter, this series is the second largest grip available.

*'''RC Shooter:'''
EZShooters are not required to use this shooter. This shooter was included with [[Remote Control Beyblades]]. When turned on, the trigger was pushed forward or backward to control the RC Beyblade. The RC shooter is the largest grip available in the game, in both plastic and HMS.

*'''Duotron Launcher:'''
With this, you are able to launcher two Beyblades at once, using one winder. This launcher is very inconsistent; launching one Beyblade at a time right after each other is more efficient.
===Grips Gallery===
<gallery>
Image: Bey_001.jpg|Customize Grip
Image: Bey_005.jpg|Marksmen Grip
Image: Bey_004.jpg|Marksmen Grip with light on.
Image: Bey_002.jpg|Dranzer Shooter
Image: Bey_003.jpg|RC Shooter
Image: Bey_006.jpg|Duotron Launcher
</gallery>

=Heavy Metal System=
===Standard Shooters===
[[Image:Bey_013.jpg|thumb|Dual Shooter]]
[[Image:Bey_014.jpg|thumb|Dual Shooter with Beyblade attached.]]
*'''Dual Shooter''':
Unlike the [[Plastic Beyblade | plastic generation]], the Dual Shooter, as suggested by the name has the ability of selecting spin direction by simply flipping the G Winder and placing it in it’s appropriate hole. This capability opened up many possibilities for the whole [[HMS]] series as there is no need to change any parts which you were once forced to do with plastic Beyblades. Attaching HMS Beyblades to the Dual Shooter is similar to the plastic generation, just line up the two clips with the end of the [[Bit Protector]] and two smaller ones will clamp onto the BP. It is common for Dual Shooters to not be very reliable, some even useless, so finding a working Dual Shooter is vital.

===HMS Grips===
[[Image:Bey_012.jpg|thumb|HMS Customize Grip.]]
*'''HMS Customize Grip:'''
This grip is basically an updated version of the Customize Grip from the [[Plastic Beyblade | plastic generation]], except it can be used by both left handed and right handed players. To do this, you remove the compartment the Dual Shooter is placed into and slide the grip onto the other side. As with the Customize Grip, the HMS Customize Grip can be customized by adding the spring trigger or rubber grip.

*'''Running Shooter:'''
This shooter was included with [[Round Shell MS]] for use in its running mode. For more information on the Running Shooter, please see Round Shell MS’s article.

Jiraiya MS

2007-11-05T13:00:09Z

Composer of Requiems: /* Attack Ring (AR): Jiraiya Blade */

{{Beybox
| image =JiraiyaMS.jpg
| full item name = Jiraiya Metal Spirits
| item number = MA-22
| beyblade system = [[Gimmick Series]]
| beyblade type = [[Survival]]
}}

__TOC__

== Name Changes ==
[[Jiraiya MS]] was released by Hasbro as Bearing Survivor MS

== Bit Protector (BP): Jiraiya Emblem ==
The Bit Protector of this Beyblade is Jiraiya Emblem. It is the third mould version of Bit Protectors. It is the tightest version; there is almost no room between the BP and AR.

== Attack Ring (AR): Jiraiya Blade ==

* '''Weight:''' 22 grams

The AR of [[Jiraiya MS]] is Jiraiya Blade. It is currently the heaviest AR ever made, weighing 22 grams, and is just a bit heavier than Samurai Upper ([[Samurai Changer MS]]). The weight distribution is mostly on the outside, giving this part greater centrifugal force, but still has a high spin velocity due to the heavy weight. The metal on the outside rims forms two thick spikes, with three small metal spikes on each one. Though they are small, they are reasonably sharp and have quite a bit amount of [[smash attack]] power. The fact that this part's revolution speed will be increased by the weight of the part will make the smash attack even stronger.

=== Use in [[Smash Attack]] Combos ===

Due to this AR's heavy weight, and yet, small size, you can build a high spin-rate combo using Circle Heavy, or a high centrifugal force based combo with Circle Wide. Circle Wide will also add to the movement speed, improving smash attack.

* '''AR:''' Jiraiya Blade ([[Jiraiya MS]])
* '''WD:''' [[Circle Heavy]] or [[Circle Wide]]
* '''RC:''' Metal Change Core [[Death Gargoyle MS|(Death Gargoyle MS/Dark Effigy MS]])

=== Use in [[Survival]] Combos ===

You can also use this AR to add some attack power and velocity to your survival-based combos:

* '''AR:''' Jiraiya Blade ([[Jiraiya MS]])
* '''WD:''' [[Circle Wide]]
* '''RC:''' Bearing Core ([[Wolborg MS]])

== Weight Disk (WD): CWD Free Cross ==

The WD of [[Jiraiya MS]] is CWD Free Cross. As you can tell from its name, this part spins freely. It is a circular shape with four spikes sticking out of it to form a cross. This WD has little use. There are much better free spinning CWDs, especially for grinding attacks.

== Running Core (RC): Bearing Core 2 ==

* '''Weight:''' 4 grams

The RC of [[Jiraiya MS]] is Bearing Core 2. This RC is the HMS successor to [[Wolborg 2]]'s SG. However, when I first touched this RC's tip, I was surprised by the fact that the material is not the same kind that was used in Wolborg 2's SG at all. It is a much harder and glossier material, like the kind used on [[Dragoon MS]]'s Grip Flat Core. Still, this RC is very useful.

Structurally, it is virtually identical to Bearing Core ([[Wolborg MS]]). It has the same shaft, bearing and design. Just like [[Wolborg MS]], the RC cannot be taken apart, so you have to season it by attaching a motor to the tip and rotating it for a long time.

This RC's [[survival]] comparison to [[Bearing Core]] is much different than comparing [[Wolborg]] and Wolborg 2's SGs. The difference is the harder material and the smoothness of the bearing. The harder rubber material produces less friction, giving it more [[survival]]. Also, with the improved design of HMS bearing system, the rotation of the shaft is much smoother.

=== Use in [[Survival]]/[[Defense]] Combos ===

You can build good survival and defense type Beyblades with this RC. Here are some examples.

'''Survival Combo:'''
* '''AR:''' Circle Upper [[Death Gargoyle MS|(Death Gargoyle MS/Dark Effigy MS)]]
* '''WD:''' [[Circle Wide]]
* '''RC:''' Bearing Core 2 ([[Jiraiya MS]])

'''Defense Combo:'''
* '''AR:''' Samurai Upper ([[Samurai Changer MS]])
* '''WD:''' CWD Free Survivor ([[Thunder Dragon]]) or CWD Reverse Defenser ([[Dranzer MF]] Secret Version)
* '''RC:''' Bearing Core 2 ([[Jiraiya MS]])

These are not necessarily the best possible combos. However, they are ones you can try.

=== Mint Condition vs Worn Condition ===
Mint condition and worn condition Bearing Core 2 will have very different uses. To beat non-aggressive Beyblades, mint tip is best. However, to beat the current trend of highly-aggressive attack types, more defense will be necessary. To gain more defense, you should use the tip and wear it down.

== Overall ==

Jiraiya Blade is not so special as an AR. Its WD is very useless. However, nobody bought this package for those parts. We all bought this package for Bearing Core 2. Bearing Core 2 is as useful as Bearing Core for serious use. However, for pure [[survival]] battles, you should select Bearing Core over Bearing Core 2. If you want to outlast an attack-type or balance-type, this RC is a very great choice. You should buy this Beyblade.

[[Category:Beyblade]]

File:Seadragon.jpg

2007-11-04T13:23:59Z

Composer of Requiems: Sea Dragon MS

Sea Dragon MS

File:CWD.jpg

2007-11-04T13:22:17Z

Composer of Requiems: Comparison of the two CWD molds. As you can see, it is difficult to tell them apart. Photo taken by Nic "Composer of Requiems"

Comparison of the two CWD molds. As you can see, it is difficult to tell them apart.

Photo taken by Nic "Composer of Requiems"

File:MAMS Tricks.jpg

2007-11-04T13:19:52Z

Composer of Requiems: Tricks of Magical Ape MS

Tricks of Magical Ape MS

File:MAMS plasticAR.jpg

2007-11-04T13:16:44Z

Composer of Requiems: The plastic AR can be used with older plastic-generation Beyblades, but there will be no place to slot the launcher.

The plastic AR can be used with older plastic-generation Beyblades, but there will be no place to slot the launcher.

File:MAMS Gyromode.jpg

2007-11-04T13:15:39Z

Composer of Requiems: Magical Ape MS, gyro mode. Note that half the outer shell is removed for clarity of inner contents. It is opaque and thus if it were not removed, it would be impossible to see inside. Photo taken by Nic "Composer of Requiems"

Magical Ape MS, gyro mode. Note that half the outer shell is removed for clarity of inner contents. It is opaque and thus if it were not removed, it would be impossible to see inside.

Photo taken by Nic "Composer of Requiems"

File:Flatcore.jpg

2007-11-04T13:12:44Z

Composer of Requiems: Comparison of flat core of Gaia Dragoon MS (yellow edition) and Magical Ape MS. Note the screw-on top for magical ape. Photo taken by Nic "Composer of Requiems"

Comparison of flat core of Gaia Dragoon MS (yellow edition) and Magical Ape MS. Note the screw-on top for magical ape.

Photo taken by Nic "Composer of Requiems"

File:Metalape.jpg

2007-11-04T13:11:35Z

Composer of Requiems: Metal Ape AR. Note the circle form of the metal piece.

Metal Ape AR. Note the circle form of the metal piece.

File:Box dragoncube goldgaleon.JPG

2007-11-04T13:09:43Z

Composer of Requiems: Box of Dragon Cube series limited edition Gold Galeon.

Box of Dragon Cube series limited edition Gold Galeon.

File:Metalapegripweight.jpg

2007-11-04T13:09:17Z

Composer of Requiems: AR: Metal Ape RC: Grip Weight Core Photo taken by Composer of Requiems

AR: Metal Ape

RC: Grip Weight Core

Photo taken by Composer of Requiems

File:Uriel2base freeshaft.jpg

2007-11-04T13:07:16Z

Composer of Requiems: Uriel2 base can be used with free shaft SG.

Uriel2 base can be used with free shaft SG.

File:Uriel2 base.jpg

2007-11-04T13:06:48Z

Composer of Requiems: Uriel2 base can use flat mode or sharp mode. Photo taken by Nic "Composer of Requiems"

Uriel2 base can use flat mode or sharp mode.

Photo taken by Nic "Composer of Requiems"

File:Gabriel.JPG

2007-11-04T13:04:43Z

Composer of Requiems: Gabriel, dissected. Photo taken by Nic "Composer of Requiems"

Gabriel, dissected.

Photo taken by Nic "Composer of Requiems"

File:SGwingbase.JPG

2007-11-04T13:01:59Z

Composer of Requiems: Base of Gabriel, using subring of gold-edition Galeon and Gaia Dragoon V. Photo taken by Nic "Composer of Requiems"

Base of Gabriel, using subring of gold-edition Galeon and Gaia Dragoon V.

Photo taken by Nic "Composer of Requiems"

File:BDMS fixedmode.JPG

2007-11-04T13:00:10Z

Composer of Requiems: Using certain combinations of parts, BDMS can be fixed into one mode permanently. Photo taken by Nic "Composer of Requiems"

Using certain combinations of parts, BDMS can be fixed into one mode permanently.

Photo taken by Nic "Composer of Requiems"

File:BDMS bp.jpg

2007-11-04T12:59:06Z

Composer of Requiems: Bit Protector of BDMS. The hole above allows it to be used with special parts like Magical Ape core. Photo taken by Nic "Composer of Requiems"

Bit Protector of BDMS. The hole above allows it to be used with special parts like Magical Ape core.

Photo taken by Nic "Composer of Requiems"

File:Bitprotector BDMS&SCMS.jpg

2007-11-04T12:56:26Z

Composer of Requiems: Special bit protectors of Bloody Devil MS and Samurai Changer MS. As shown, they are interchangeable, but if it is used with SCMS, you will be unable to use CWD piece. Photo taken by Nic "Composer of Requiems"

Special bit protectors of Bloody Devil MS and Samurai Changer MS. As shown, they are interchangeable, but if it is used with SCMS, you will be unable to use CWD piece.

Photo taken by Nic "Composer of Requiems"

File:BDMS core.jpg

2007-11-04T12:53:27Z

Composer of Requiems: Core of Bloody Devil MS. Shows the mode change mechanism. Outer casing is the "flat" mode, while inner shaft, when sticking out, is "Sharp" mode. As can be seen in the bottom two photos, the shaft has two parts. The lower and upper parts fit together ni

Core of Bloody Devil MS. Shows the mode change mechanism.

Outer casing is the "flat" mode, while inner shaft, when sticking out, is "Sharp" mode.

As can be seen in the bottom two photos, the shaft has two parts. The lower and upper parts fit together nicely in the alignment shown in the bottom photo, but perpendicularly it will not fit, and thus extrude further, changing it from flat to "sharp" mode.

Photo taken by Nic "Composer of Requiems"

File:BDMS WD.jpg

2007-11-04T12:46:54Z

Composer of Requiems: Weight Disc on running core of Bloody Devil MS. Note that it is placed right at the bottom and held in place with a specialized bit protector. Top image is stock Bloody Devil MS while bottom image uses circle wide WD.

Weight Disc on running core of Bloody Devil MS. Note that it is placed right at the bottom and held in place with a specialized bit protector. Top image is stock Bloody Devil MS while bottom image uses circle wide WD.

File:Weight disc.jpg

2007-11-04T12:46:42Z

File:Bloodydevil.jpg

2007-11-04T12:43:03Z

Composer of Requiems: Bloody Devil MS, without stickers. Photo taken by Nic "Composer of Requiems"

Bloody Devil MS, without stickers. Photo taken by Nic "Composer of Requiems"

File:Plastic bushing.JPG

2007-11-04T12:40:07Z

Composer of Requiems: Comparison of the plastic bushings that come with Flame Pegasus, and the NSK bearings that come with most bearing Beyblades.

Comparison of the plastic bushings that come with Flame Pegasus, and the NSK bearings that come with most bearing Beyblades.

File:Shortshaft.jpg

2007-11-04T12:37:45Z

Composer of Requiems: Comparison of using a standard bearing SG (Wolborg) and the shaft of bearing SG in free shaft SG casing (Dranzer S) (left to right) Top: Bearing SG, BearingSG shaft in Free Shaft SG Middle: SG Flat Base, BearingSG shaft in Free Shaft SG in Bearing Base 2

Comparison of using a standard bearing SG (Wolborg) and the shaft of bearing SG in free shaft SG casing (Dranzer S)

(left to right)
Top: Bearing SG, BearingSG shaft in Free Shaft SG
Middle: SG Flat Base, BearingSG shaft in Free Shaft SG in Bearing Base 2 (Wolborg2)
Bottom: Same as top, but now in Bearing Base 2

Photo taken by Nic "Composer of Requiems"

File:WolborgIV.jpg

2007-11-04T12:32:14Z

Composer of Requiems: Limited Ice Blue edition Wolborg IV

Limited Ice Blue edition Wolborg IV

File:Metalsharpcore.jpg

2007-11-04T12:32:11Z

Composer of Requiems: Comparison of Wyvern DJ and ADV Eterner metal sharp cores. Note that ADV Eterner is normally red, this is the limited blue edition. Photo taken by Nic "Composer of Requiems"

Comparison of Wyvern DJ and ADV Eterner metal sharp cores. Note that ADV Eterner is normally red, this is the limited blue edition. Photo taken by Nic "Composer of Requiems"

File:Advancesurvivor.jpg

2007-11-04T12:30:01Z

Composer of Requiems: Advance Survivor attack ring. Metal piece can be flipped. Photo taken by Nic "Composer of Requiems"

Advance Survivor attack ring. Metal piece can be flipped. Photo taken by Nic "Composer of Requiems"

File:Uriel2.jpg

2007-11-04T12:26:18Z

Composer of Requiems: Uriel2, prize of RB8. Photo taken by Nic "Composer of Requiems"

Uriel2, prize of RB8. Photo taken by Nic "Composer of Requiems"

File:Seaborg.jpg

2007-11-04T12:25:47Z

Composer of Requiems: Limited Navy Blue edition Seaborg, sold as part of "Dragon Cube" series for use in grabbing arm game machines. Photo taken by Nic "Composer of Requiems"

Limited Navy Blue edition Seaborg, sold as part of "Dragon Cube" series for use in grabbing arm game machines. Photo taken by Nic "Composer of Requiems"

File:Goldgaleon.jpg

2007-11-04T12:23:53Z

Composer of Requiems: Limited Gold Edition Galeon, sold as part of "Dragon Cube" series for use in grabbing arm game machines. Photo taken by Nic "Composer of Requiems"

Limited Gold Edition Galeon, sold as part of "Dragon Cube" series for use in grabbing arm game machines. Photo taken by Nic "Composer of Requiems"

File:Darkdriger.jpg

2007-11-04T12:23:08Z

Composer of Requiems: Dark Driger. Photo taken by Nic "Composer of Requiems"

Dark Driger. Photo taken by Nic "Composer of Requiems"

File:Bluedragoon.jpg

2007-11-04T12:21:20Z

Composer of Requiems: Limited Blue Edition Dragoon G, with blue plated wide defence from Official Tournament Companion Accessory Pack. Photo taken by Nic "Composer of Requiems"

Limited Blue Edition Dragoon G, with blue plated wide defence from Official Tournament Companion Accessory Pack. Photo taken by Nic "Composer of Requiems"

File:Autochange.jpg

2007-11-04T12:20:08Z

Composer of Requiems: How to use auto change core (Dranzer Auto Change Balancer) in sharp mode. Photo taken by Nic "Composer of Requiems"

How to use auto change core (Dranzer Auto Change Balancer) in sharp mode. Photo taken by Nic "Composer of Requiems"

File:Freeshaftcore.JPG

2007-11-04T12:18:13Z

Composer of Requiems: Core of Dranzer MF. Photo taken by Nic "Composer of Requiems"

Core of Dranzer MF. Photo taken by Nic "Composer of Requiems"

File:DarkleopardMS.jpg

2007-11-04T12:16:25Z

Composer of Requiems: Photo of Dark Leopard MS. Taken by Nic "Composer of Requiems"

Photo of Dark Leopard MS. Taken by Nic "Composer of Requiems"